Magnesium Chloride Anhydrous Hexahydrate Manufacturers MgCl2

Anmol Chemicals is the pioneer manufacturers of Magnesium Chloride, Pharmaceutical Excipients Food & Flavor chemicals in India. We offer Halal and Kosher Magnesium Chloride made in an ISO9001, ISO22000 (FSSC22000) and cGMP certified facility. Our group has several manufacturing facilities spread across the world, supported by toll manufacturers and representatives in UAE, Europe, Africa, USA, China and has several associated manufacturing facilities spread across India. All the Information on Physics, Chemistry, Applications, Uses and Technology on Manufacture of Magnesium Chloride is in these pages.

The units have one or more of the certifications like FDA GMP, ISO 9001, ISO 22000, HACCP, REACH, Kosher & Halal

Magnesium Chloride Manufacturers

CAS Number 7786-30-3 (Magnesium Chloride Anhydrous), Molecular Weight: 95.21, Chemical Formula: MgCl2, EINECS 232-094-6
CAS Number 7791-18-6 (Magnesium Chloride Hexahydrate), Molecular Weight: 203.31, Chemical Formula: MgCl2 6H2O, EINECS 232-094-6

Magnesium Chloride Anhydrous, Lumps, Powder, Crystals, Hexahydrate, IP BP Ph Eur USP Analytical Reagent FCC Food Grades

Magnesium Chloride Anhydrous Specifications:

Magnesium Chloride Hexahydrate Specifications:

Commercial Flakes & Crystals Magnesium chloride hexahydrate
Formula: MgCl2.6H2O
Molecular Weight: 203.3
Purity as MgCl2.6H2O: 99% minimum
Appearance: White Flakes
Sulphate: 0.5% maximum
Calcium: 0.7% maximum
Iron: 25 ppm maximum
Heavy Metals: 5 ppm maximum

Magnesium Chloride USP

MgCl2-6H2O -- 203.30
Mag. Chlo. hexahydrate [CAS Number 7791-18-6]
Anhydrous 95.21 [CAS Number 7786-30-3]

Magnesium Chloride contains not less than 98.0 percent and not more than 101.0 percent of MgCl2·6H2O.
Packaging and storage: Preserve in tight containers.
Labeling: Where the product is intended for use in hem dialysis, it is so labeled.
Identification: A solution (1 in 20) responds to the tests for Magnesium and for Chloride
pH: between 4.5 and 7.0, in a 1 in 20 solution in carbon dioxide-free water.
Insoluble matter: not more than 0.005% is found.
Sulfate: A 10-g portion shows no more sulfate than corresponds to 0.50 mL of 0.020 N sulfuric acid (0.005%).
Barium: Dissolve 1 g in 10 mL of water, and add 1 mL of 2 N sulfuric acid: no turbidity is produced within 2 hours.
Limit of calcium: the limit is 0.01%.
Potassium: Dissolve 5 g in 5 mL of water, and add 0.2 mL of sodium bitartrate TS: no turbidity is produced within 5 minutes.
Aluminum (where it is labeled as intended for use in hem dialysis)— the limit is 1 µg per g.
Heavy metals: the limit is 0.001%.
Organic volatile impurities: meets the requirements.

Magnesium Chloride BP

MgCl2.6H2O
Magnesium Chloride BP
Magnesium Chloride Hexahydrate BP[CAS Number 7791-18-6].
Magnesium Chloride Anhydrous BP 95.21 [CAS Number 7786-30-3].

CHARACTERS
Appearance: Colourless crystals, hygroscopic.
Solubility: Very soluble in water, freely soluble in ethanol (96 per cent).

IDENTIFICATION
Water % (see Tests).
It gives reaction of chlorides.
It gives the reaction of magnesium.

TESTS
Solution S: Dissolve 10.0 g in carbon dioxide-free water R prepared from distilled water and dilute to 100.0 ml with the same solvent.
Appearance of solution: Solution S is clear and colourless.
Acidity or alkalinity: To 5 ml of solution S add 0.05 ml of phenol red solution R. Not more than 0.3 ml of 0.01 M hydrochloric acid or 0.01 M sodium hydroxide is required to change the colour of the indicator.
Bromides: Maximum 500 ppm.
Sulphates: Maximum 100 ppm, determined on solution S.
Aluminium
Maximum 1 ppm, if intended for use in the manufacture of peritoneal dialysis solutions, hem dialysis solutions, or haemofiltration solutions.
Arsenic
Maximum 2 ppm, determined on 0.5 g.
Calcium: Maximum 0.1 per cent.
Iron: Maximum 10 ppm, determined on solution S.
Potassium: Maximum 5.0 × 102 ppm, if intended for use in the manufacture of parenteral dosage forms.
Atomic emission spectrometry: Passes the test
Heavy metals: Maximum 10 ppm.
Water: 51.0 per cent to 55.0 per cent, determined on 50.0 mg.

Magnesium Chloride FCC Food Grade, US Food Chemical Codex

DESCRIPTION
Magnesium Chloride occurs as colorless flakes or crystals. It contains six molecules of water of hydration. It is hygroscopic, very soluble in water, and freely soluble in alcohol.
Function: Color-retention agent, firming agent.

REQUIREMENTS
Identification: A 1:10 aqueous solution gives positive tests for Magnesium and for Chloride.
Assay: Not less than 99.0% and not more than 105.0% of MgCl2·6H2O.
Ammonium: Not more than 0.005%.
Lead: Not more than 4 mg/kg.
Sulfate: Not more than 0.03%.

Magnesium Chloride Hexahydrate Analytical Reagent Specifications

MAXIMUM ALLOWABLE
Insoluble matter: 0.005%
Nitrate (NO3): 0.001%
Phosphate (PO4): 5 ppm
Sulfate (SO4): 0.002%
Ammonium (NH4): 0.002%
Barium (Ba): 0.005%
Calcium (Ca): 0.01%
Manganese (Mn): 5 ppm
Potassium (K): 0.005%
Sodium (Na): 0.005%
Strontium (Sr): 0.005%
Heavy metals (as Pb): 5 ppm
Iron (Fe): 5 ppm.

Exports to USA, Canada, UAE, Dubai, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Europe Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Norway, Ukraine, Korea, Japan, etc.

Magnesium Chloride Hexahydrate IP BP USP ACS Analytical Reagent FCC Food Grade & Anhydrous manufacturers:

Anmol Chemicals
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564. FAX: 91-22-23728264